THS-1134A-30T
May not be exact product—for reference only.
- Family: TIME DELAY RELAY
- Function: WATCHDOG
- Timing Range: 0.1 - 10 sec
- Control Voltage: 24-240V AC
- Output: 1A NORMALLY OPEN (SOLID STATE)
Description Of Function
Upon application of input voltage, the time delay relay is ready to accept a trigger. When the trigger is applied, the output is energized and the time delay (t) begins. At the end of the time delay (t), the output is de-energized unless the trigger is removed and re-applied prior to time out (before time delay (t) elapses). Continuous cycling of the trigger at a rate faster than the time delay (t) will cause the output to remain energized indefinitely.
Function Chart
Application Information
- Voltage Tolerance: AC Operation: +10/-15% of nominal at 50/60 Hz
- Load (Burden): Maximum of 1 VA for all voltages
- Setting Accuracy: Maximum Setting (Adjustable): +5%, -0%; Minimum Setting (Adjustable): +0%, -50%; Fixed Time Delay: +2% or 50ms, whichever is greater
- Repeat Accuracy (Constant Voltage & Temperature): +0.1% or + 0.04 seconds, whichever is greater
- Reset Time: 40ms
- Output Contacts: Solid State 1A Continuous, 10A Inrush @ 65o C
- Life: No predictable failure if used within operating parameters.
Leakage Current (OFF-State): <5 mA @ 240VAC
Minimum Load Current: 20mA
Effective Voltage Drop (ON-State): Maximum 3V @ 1A for all voltages
- Temperature: -28o to 65oC (-18o to 149oF)
-
Approvals:
Dimensions - Inches (Millimeters)
Macromatic Distributor Stock Status
-
The THS-1134A-30T is not stocked by any Macromatic distributor. Please see below for any product substitutions.
Contact Macromatic for more information or how to purchase this product.
Contact Macromatic
Fill out this form to have Macromatic contact you about this product.