Competitive Cross Reference
Macromatic offers this cross-reference as a service to our customers to assist in the selection of replacement products. Every effort has been made to insure that these products are electrically and functionally equivalent to the Macromatic products except as noted. Macromatic cannot be responsible for errors of printing or corrections of data taken from published competitive data. It is the user's responsibility to insure the suitability of the substitution.
If you have any questions regarding these cross-references, or need to cross reference any product not listed, please contact Macromatic.
* If a part number is not found, select the "Series Name" from the right-hand drop down.
Or select competitor part series:
800.238.7474
Product Specifications
LCP2D250
Use socket: 70169-D
Image may not be exact product—for reference only.
Competitor: Ingram
- Competitor Part #: LLC2P120A
- Series: Liquid Level Control
- Macromatic Equivalent: LCP2D250
- Differences: Ingram LLC2P120A is selectable between pump up or pump down applications with 120V AC control. For pump up applications, use the Macromatic LCP2C250. For pump down applications, use Macromatic LCP2D250. Ingram has a sensitivity range of 500 to 100K Ohms and the Macromatic LCP2D250 has a range of 1K – 250K Ohms. Ingram has a 4 amp SPDT output while Macromatic has a 10 amp SPDT output. Ingram has an adjustable response time of 0.5 – 10 sec while Macromatic has a 1 sec fixed pick-up and 1 sec fixed drop-out. Ingram LED single color and activates when relay energized while Macromatic LED is multi-colored: Green ON with input voltage applied, Red flashing during timing; Red ON when relay energized. Ingram has 100,000 Mechanical / 50,000 Electrical Life expectancy while Macromatic has 10,000,000 Mechanical / 100,000 Electrical. Both are 120V rated with 8 socket configuration and similar dimensions.
- Family: LIQUID LEVEL CONTROL RELAY
- Function: DUAL PROBE PUMP DOWN
- Sensitivity Range: Sensitivity Range: 1K - 250K Ohms
- Input Voltage: 120V AC
- Output: 10A SPDT
Description of function:
Pump Down (Drain): When the liquid level rises & touches the high level probe, a 1 second time delay begins & the LED flashes Red. At the end of the delay, the output relay energizes & the LED is Red ON. The pump is ON to drain the tank. The relay remains energized until the liquid level falls below the low level probe. The output relay de-energizes, turning off the pump, and remains de-energized & the LED is Green ON until the liquid level rises & touches the high level probe.
Function Chart:
Application Information
- Voltage Tolerance: AC Operation: +10/-15% of nominal at 50/60 Hz.
- Load (Burden): 2 VA
- Indicator LEDs: Green ON with Input Voltage applied; Red Flashing during timing; Red ON when relay energized.
- Probe Voltage: 5V DC Pulsed
- Response Time: Pick-up: 1 second; Drop-out: 1 second
- Output Contacts: 10A @ 240V AC/7A @ 28V DC, 1/4HP @ 120V AC (N.O.)
- Life: Mechanical: 10,000,000 operations; Full Load: 100,000 operations
- Temperature: -28o to 65o C (-18o to 149o F)
- Approvals:
Dimensions
Inches (Millimeters)