Competitive Cross Reference

Macromatic offers this cross-reference as a service to our customers to assist in the selection of replacement products. Every effort has been made to insure that these products are electrically and functionally equivalent to the Macromatic products except as noted. Macromatic cannot be responsible for errors of printing or corrections of data taken from published competitive data. It is the user's responsibility to insure the suitability of the substitution.

If you have any questions regarding these cross-references, or need to cross reference any product not listed, please contact Macromatic.

* If a part number is not found, select the "Series Name" from the right-hand drop down.

Or select competitor part series:

Macromatic Equivalent

Catalog Number: THS-1154D-02R7

May not be exact product—for reference only.

Family: TIME DELAY RELAY
Function: SINGLE SHOT (SWITCH TRIGGER)
Timing Range: 0.01-1 Sec delay adjusted remotely with 1M potentiometer (customer supplied)
Control Voltage: 12-125V DC
Output: 1A NORMALLY OPEN (SOLID STATE)

National Controls Corp (NCC) Product

Competitor Part # Q2F-00001-326 | Series: Q2F

Differences:

NCC unit has time range of 0.05-1 Sec. & input voltage of 12VDC; Macromatic unit has time range of 0.01-1 Sec. & input voltage of 12-120VDC

Files

Description Of Function Upon application of input voltage, the time delay relay is ready to accept a trigger. When the trigger is applied, the output is energized and the time delay (t) begins. During the time delay (t), the trigger is ignored. At the end of the time delay (t), the output is de-energized and the time delay relay is ready to accept another trigger.

Function Chart

Application Information

Voltage Tolerance: DC Operation: +10/-15% of nominal.
Load (Burden): Maximum of 1 VA for all voltages
Setting Accuracy: Maximum Setting (Adjustable): +5%, -0%; Minimum Setting (Adjustable): +0%, -50%; Fixed Time Delay: +2% or 50ms, whichever is greater
Repeat Accuracy (Constant Voltage & Temperature): +0.1% or + 0.04 seconds, whichever is greater
Reset Time: 40ms
Output Contacts: Solid State 1A Continuous, 10A Inrush @ 65^o C
Life: No predictable failure if used within operating parameters.
Leakage Current (OFF-State): <10 uA @ 125VDC
Minimum Load Current: 0mA
Effective Voltage Drop (ON-State): Maximum 0.69V @ 1A for all voltages
Temperature: -28^o to 65^oC (-18^o to 149^oF)
Approvals:

Dimensions - Inches (Millimeters)

Macromatic Distributor Stock Status

The THS-1154D-02R7 is not stocked by any Macromatic distributor. Please see below for any product substitutions.
Contact Macromatic for more information or how to purchase this product.

Contact Macromatic

Fill out this form to have Macromatic contact you about this product.

www.macromatic.com
800.238.7474

Product Specifications

THS-1154D-02R7

Image may not be exact product—for reference only.

Competitor: National Controls Corp (NCC)

Competitor Part #: Q2F-00001-326
Series: Q2F
Macromatic Equivalent: THS-1154D-02R7
Differences: NCC unit has time range of 0.05-1 Sec. & input voltage of 12VDC; Macromatic unit has time range of 0.01-1 Sec. & input voltage of 12-120VDC

Family: TIME DELAY RELAY
Function: SINGLE SHOT (SWITCH TRIGGER)
Timing Range: 0.01-1 Sec delay adjusted remotely with 1M potentiometer (customer supplied)
Input Voltage: 12-125V DC
Output: 1A NORMALLY OPEN (SOLID STATE)

Description of function:

Upon application of input voltage, the time delay relay is ready to accept a trigger. When the trigger is applied, the output is energized and the time delay (t) begins. During the time delay (t), the trigger is ignored. At the end of the time delay (t), the output is de-energized and the time delay relay is ready to accept another trigger.

Function Chart:

Application Information

Voltage Tolerance: DC Operation: +10/-15% of nominal.
Load (Burden): Maximum of 1 VA for all voltages
Setting Accuracy: Maximum Setting (Adjustable): +5%, -0%; Minimum Setting (Adjustable): +0%, -50%; Fixed Time Delay: +2% or 50ms, whichever is greater
Repeat Accuracy (Constant Voltage & Temperature): +0.1% or + 0.04 seconds, whichever is greater
Reset Time: 40ms
Output Contacts: Solid State 1A Continuous, 10A Inrush @ 65^o C
Life: No predictable failure if used within operating parameters.
Leakage Current (OFF-State): <10 uA @ 125VDC
Minimum Load Current: 0mA
Effective Voltage Drop (ON-State): Maximum 0.69V @ 1A for all voltages
Temperature: -28^o to 65^oC (-18^o to 149^oF)
Approvals:

Dimensions

Inches (Millimeters)

Competitive Cross Reference

Approvals:

Product Specifications

THS-1154D-02R7

Competitor: National Controls Corp (NCC)

Description of function:

Function Chart:

Application Information

Dimensions