ATP Series Triplex
Plug-in
Triplex Alternating Relays
With Switch
Without Switch
| Features |
|
| Enclosure Style | Plug-in case utilizing industry-standard 8 or 12 pin square sockets |
| Configuration/ Contact Rating |
|
| Approvals |   UL File #E109466 |
| Technical Documentation |
Operation:
Triplex Alternating Relays are used in three load applications requiring both the optimization of load usage by equalizing the run time of multiple loads and additional capacity in case of excess load requirements.
As standard, these products operate as a normal Triplex with three inputs. An optional version with an 8-position rotary switch is offered (see picture at right). This allows the unit to operate as either a:
- Standard Triplex
- Triplex locking Load 1, 2 or 3 as the first to be energized (Lead Load)
- Standard Duplex until system expansion requires control for a third Load
- Duplex locking Load 1 or 2 as the first to be energized (Lead Load)
All versions offer an indication of a switch failure (out-of-sequence)-LEDs will flash if any switch closes out of sequence. Also, if power is lost & returns with more than just the LEAD Switch closed, there is a fixed 10 second delay between energization of the first output & subsequent outputs to prevent all Loads from coming on at the same time.
Macromatic's Alternating Relays Knowledge Base contains general and technical industry articles to help you learn more about Alternating Relays.
Triplex Alternating Relays
With Switch
Without Switch
